Let's try again, Dorothy

Weaving - Take 2:

So, I promised Dorothy not to put her back in the laundry room, dejected & defeated for another year.
Let's PLAY some more...

That Scarf has issues, sure. But this is no time to quit. Practice Makes Perfect ...okay NOT perfect. Exactly.
But we'll have fun, explore possibilities and see what happens. (Warping the loom began while it was still very dark outside...)

Besides. It's freaking cold outside.
What else is there to do?

And my 1st born baby moved to Minnesota.
Total Travel Estimate: 26 hours 51 minutes / 1631.58 miles
Mom distractions needed to fight the It's not just for a visit this time blues.

Daylight arrived to light up the fact that we had a long way to go before weaving could commence.

No surprise here...?
This project didn't go exactly as planned either.
But we had a good time getting there and Dorothy is still welcome in the living room. (Just to be clear ;)

I chose a pattern for threading the warp from Mastering Weave Structures, page 208: Plain Weave with Rib weave stripe.

I had actually considered trying fabric strips, mixed in with textured yarns in shades of tan to yellow.

That didn't seem like it was going to work so I tried to follow the actual directions from page 208.
More or less.
I soon realized the warp I used would be too thin to match the texture of the sample on page 209.
So I did just a plain weave.
Back and forth; boringly satisfying.

No Rib Weave yet for Dorothy and I.
Sugar 'n Cream cotton yarn weft. Potpourri.

Things learned best NOT to do this time:

Take off wire heddles after the loom has been threaded.
There were too many wires strung on shafts 3 & 4 since I was trying to thread all the way across the frame. The extras usually pile up on the side and hang out of the way. Threads from shaft 1 & 2 could not get past the stack of unused heddles hanging on the sides of 3 & 4.

Add 2nd strip of (yellow) warps after the loom is threaded to double each of the warps where Rib Weave would have happened.
I added 6 to each side, proving it could be done.
Gave up on the other 30 or so in varying colors I had considered.

A Temple is a new term I've only just learned. It might possibly have kept the woven fabric from pulling in so much trying to do the Rib Weave. Pretty hard on the outside warps if the beater has to smack 3 or 4 on the outside in either direction away from the actual edge.

This is why warp yarn breaks?
I think yes.
This is why I quit while I was ahead and settled for boringly satisfying.